LIBRARY
2024 CPES Conference
1 - Design and Control of Power Converters (Click to Expand)
1.1: Stability Analysis of Multiphase Current-mode Constant On-Time Control with Phase Overlapping
Sundaramoorthy Sridhar, Qiang Li
1.2: Design and Optimization of a Planar Omnidirectional Wireless Power Transfer System for Consumer Electronics
Xipei Yu, Junjie Feng, Liyan Zhu, Qiang Li
1.3: An Improved Class-E Current Inverter with Two Coupled Inductors for Isolation and Power Scaling without Affecting Switch Voltage Stress
Bo Li, Khai Ngo
1.4: Critical Conduction Mode Control for Coupled Inductor Based Totem-pole PFC
Gibum Yu, Xingyu Chen and Qiang Li
1.5: Analysis of Parasitic Stored Energy Loss and PCB Layout Optimization for 48V-to-1V Series-Capacitor Buck
Xinmiao Xu, Qiang Li
1.6: Selective Phase-Shifting Control of Secondary-Rectifiers in LLC Converters with Matrix Transformers
Pranav Raj Prakash, Ahmed Nabih and Qiang Li
1.7: Hybrid Modulation Method for Single Phase Full Bridge CRM Inverter to Improve Reactive Power Capability
Xingyu Chen, Qiang Li
2 - Power Devices and Packaging (Click to Expand)
2.1: A PCB-Embedded 1.2 kV SiC MOSFET Package with Reduced Manufacturing Complexity
Jack Knoll, Christina DiMarino, Hannes Stahr, Mike Morianz
2.2: The Packaging Engineer and EMI: Effect of Power Module Architecture on Common Mode Electromagnetic Interference
Taha Moaz, Christina DiMarino, Narayanan Rajagopal
2.3: Packaging of 15 kV Silicon Carbide Half-Bridge Module Enabled by a Polymer Nano-Composite Field-Grading Coating
Zichen Zhang, Shengchang Lu, Carl Nicholas, Justin Lynch, Adam Morgan, Woongje Sung, Khai D. T. Ngo, Guo-Quan Lu
2.4: In-situ Dynamic RON Measurement of Vertical GaN JFET
Xin Yang, Ruizhe Zhang, Yuhao Zhang
2.5: Modeling and Analysis of Multi-Layer High-Voltage Power Modules Design Using Generalized Multiport Network
Yu Chen, Narayanan Rajagopal, Christina DiMarino
2.6: Planar Implantation Edge Termination for Vertical GaN Power Devices
Yifan Wang, Ming Xiao, Matthew Porter, Ruizhe Zhang, Qihao Song, Albert Lu, Nathan Yee, Hiu Yung Wong, Yuhao Zhang
2.7: Kilovolt-class GaN HEMT with RESURF Structure
Yijin Guo, Yifan Wang, Yuhao Zhang
2.8: Output Capacitance Loss of GaN HEMTs in Steady-State Switching
Qihao Song, Ruizhe Zhang, Qiang Li, Yuhao Zhang
2.9: P-Type Doping Control of Magnetron Sputtered NiO for High Voltage UWBG Device Structures
Matthew Porter, Yunwei Ma, Yuan Qin, Yuhao Zhang
2.10: Design and Fabrication of Gallium Oxide Junction Barrier
Schottky Diode with High Bias Reliability
Joseph Spencer
3 - High-Power Applications (Click to Expand)
3.1: Multi-objective Design Optimization and Selection of Bidirectional DC-DC Converters for Solid Oxide Fuel Cell
Ahmed Amr Saafan, Andres Nader, Dong Dong, Rolando Burgos
3.2: A Novel High Efficiency Solid State Transformer based EV Charger
J.D. Sathri, Marie Lawson, Dong Dong
3.3: Easy-to-Implement Sub-10 ns Synchronization Techniques for PEBB-based Modular Power Converters
Mingze Gao, Vladimir Mitrovic, Rolando Burgos
3.4: Insulation Coordination of a 22 kV DC to 13.8 kV AC, 1.1 MVA 3-phase 7-level Flying Capacitor Converter
David Nam, Joshua Stewart, Arthur Mendes, Ning Yan, Rolando Burgos
3.5: Model-Based Design and Analysis of a Navy Integrated Power Electronics Building Block (NiPEBB)
Marie Lawson, Taha Moaz, Narayanan Rajagopal, Vladimir Mitrovic, Dong Dong, Christina DiMarino
3.6: Synthesis and Design of a Medium-to-Low Voltage, High Step-Down Coaxial dc-to-dc Converter
Aakash Kamalapur, Jung-Soo Bae, Mark Cairnie, Christina DiMarino, Qiang Li, Khai D. T. Ngo
3.7: Hybrid Modular Multilevel Converters for Medium-Voltage Variable Speed Motor Drives
Aditya Rao
4 - Magnetics and EMI (Click to Expand)
4.1: Gate Driver Design with Improved Near Field Noise Immunity for Medium-voltage High-power SiC-based Converters
He Song, Dushan Boroyevich
4.2: A High Efficiency High Density Three-Phase CLLC Resonant Converter with A Universally Derived Three-Phase Integrated Transformer for On-Board Charger Application
Feng Jin, Ahmed Nabih, Tianlong Yuan, Qiang Li
4.3: Design of a 1 kV, 250 kW, 200 kHz Transformer Based on Modular Winding Unit Building Blocks
Minh Ngo, Yuliang Cao, Dong Dong, Rolando Burgos
4.4: Investigation of Conducted EMI Emissions in Auxiliary Circuitry of 10 kV SiC MOSFET Based Power Electronics Building Blocks
Ashkan Barzkar, Boran Fan, He Song, Joshua Stewart, Rolando Burgos, Dong Dong, and Dushan Boroyevich
4.5: Modeling of the Balance Technique Network for Common Mode Noise Suppression
Qiuzhe Yang, Shuo Wang, Qiang Li
4.6: Modelling and Analysis of Voltage Overshoot in Bidirectional Phase-Shift Full Bridge Converters
Tien-Sheng Li, Minh Ngo, Rolando Burgos, Dong Dong
4.7: Winding Analysis of PCB Transformer in High Current, High
Power Density Intermediate Bus Converter
Yan Liang
5 - Power Electronics and Power Systems (Click to Expand)
5.1: Multi-functional High-voltage DC (HVDC) Converter
Jiaxiong Yu
5.2: Small-Signal Characterization of Selective Harmonics Elimination (SHE) Modulation and its Impact on Passivity-based Impedance Analysis
Qing Lin, Rolando Burgos, Boran Fan
5.3: Towards Efficient Power Flow Modeling: A Bottom-to-Top Approach for Dynamic Integration of Distributed Energy Resources
Shivani Nair and Richard Zhang
5.4: Black Start Feasibility Study Under Grid-Forming, Inverter-based Photovoltaic (PV) Resources
Biqi Wang
5.5: System-level Assessment for Power Quality Impact on Household Electronic Devices
Jeet Panchal, Dong Dong, Rolando Burgos
5.6: A Generalized Space Vector Modulation (SVM) Algorithm for Three-Phase Converters to Calculate Proper Phase Voltages
Ashkan Barzkar, Rolando Burgos
