Become a Member
Become a Member
LIBRARY
  2. Library
  3. Viewnugget
  4. 98

Efficient Heat Extraction by Fluidic Channel Cooling

Year: 2005
Fig. 1. Sketch of a chip with double side channel cooling. A copper layer is covered on the channel surface for uniform heat distribution.
CPES researchers have designed a double-sided channel cooling structure that is capable to extract heat of 200W/cm2. A figure on the right shows the sketch of the double-sided fluidic cooling configuration. The channel is realized on top of the chip surface by using sacrificial polymer. A copper layer is inserted in between the channel and the chip surface in order to obtain a uniform heat distribution. On the backside of the chip, a series of channels are etched to allow fluid cooling. A thin copper layer is deposited in the channel surface, which will reduce the time required to reach stable heat extraction. This research demonstrates for the first time of a design of a double-sided fluidic channel cooling structure. The incorporation of copper layer is of the first time to be used in channel fluidic cooling.


Fig. 2. SEM photograph of a microchannel fabrication on Si substrate.
Fig. 3. An array channel fabrication on Si substrate. The dimension of the array is in centimeter scale.
Return to CPES Showcase

Our Industry Partners

About CPES

Events/Presentations

Education

Interested in Becoming a CPES Member?

Learn more


Having technical issues?

Get Help

Copyright © 2021 Virginia Tech Center for Power Electronics Systems