2013 Lab Dialogue Sessions

Session D1: Wide Bandgap Power Devices

• D1: Evaluation of Commercial SiC and GaN Devices using Full Bridge Inverter Simulation Harsh Naik, T. Paul Chow

• 
  Abstract:
  
  

• D2: Monolithic Optoelectronic Integration of GaN High-Voltage Power FETs and LEDs with a Selective Epi Removal Process John Waldron, Robert Karlicek, T. Paul Chow

• 
  Abstract:
  
  

• D3: Investigation of Pyroelectric Polarization Effect On GaN MOS Capacitors and Field-Effect Transistors Jie Zhang, Colin Hitchcock, Zhongda Li, T. Paul Chow

• 
  Abstract:
  
  

• D4: Estimate of Avalanche Breakdown Voltage in 4H-SiC Zachary Stum, Yi Tang, Harsh Naik, T. Paul Chow

• 
  Abstract:
  
  

• D5: Loss Analysis of 600V Gallium Nitride HEMT in Cascode Structure with Simulation Model Zhengyang Liu, Xiucheng Huang, Qiang Li, Fred. C. Lee

• 
  Abstract:
  
  

• D6: Three-Level Driving Method for GaN Power Transistor in Synchronous Buck Converter Xiaoyong Ren, David Reusch, Shu Ji, Zhiliang Zhang, Mingkai Mu, Fred C. Lee

• 
  Abstract:
  
  

• D7: Optimization of a High Density Gallium Nitride Based Non-Isolated Point of Load Module David Reusch, Fred C. Lee, David Gilham, Yipeng Su

• 
  Abstract:
  
  

• D8: Analytical Loss Model of High Voltage GaN HEMT in Cascode Configuration Xiucheng Huang, Zhengyang Liu, Qiang Li, Fred. C. Lee

• 
  Abstract:
  
  

• D9: Characterization and Comparison of Seven Different 1.2 kV SiC Power Semiconductor Devices at High Temperature Christina DiMarino, Zheng (Henry) Chen, Milisav Danilovic, Dushan Boroyevich, Paolo Mattavelli

• 
  Abstract:
  
  

• D10: Behavioral Comparison of Si and SiC Power MOSFETs for High-Frequency Applications Zheng (Henry) Chen, Jin Li, Dushan Boroyevich

• 
  Abstract:
  
  

• D11: Experience with 1 to 3 MHz Power Conversion Using eGaN FETs Yin Wang, Woochan Kim, Zhemin Zhang, Jesus Calata, Khai D.T. Ngo

• 
  Abstract:
  
  

• D12: Avalanche Breakdown Design Parameters in GaN Zhongda Li, Vipindas Pala, T. Paul Chow

• 
  Abstract:
  
  

Session D2: Converters and Control

• D1: A Universal Adaptive Driving Scheme for Synchronous Rectification in LLC Resonant Converters Weiyi Feng, Fred C. Lee, Paolo Mattavelli, Daocheng Huang

• 
  Abstract:
  
  

• D2: Optimal Trajectory Control of Burst Mode for LLC Resonant Converter Weiyi Feng, Fred C. Lee, Paolo Mattavelli

• 
  Abstract:
  
  

• D3: Modulation Methods Comparison for Neutral-Point-Clamped Three-Phase Inverters Xuning Zhang, Dushan Boroyevich,Rolando Burgos, Paolo Mattavelli, Fred Wang

• 
  Abstract:
  
  

• D4: Ripple Power Balance Analysis on Plug-in Hybrid Electric Vehicle Charger with Sinusoidal Charging Lingxiao Xue, Paolo Mattavelli, Dushan Boroyevich

• 
  Abstract:
  
  

• D5: A Testbed for Experimental Validation of a Low-Voltage DC Nanogrid for Buildings Igor Cvetkovic, Dong Dong, Wei Zhang, Li Jiang, Dushan Boroyevich, Fred C. Lee, Paolo Mattavelli

• 
  Abstract:
  
  

• D6: Leakage Current Reduction in Single-Phase Bi-Directional AC-DC Full-Bridge Inverter Dong Dong, Fang Luo, Dushan Boroyevich, Paolo Mattavelli

• 
  Abstract:
  
  

• D7: Modular-Multilevel-Converters Family - A Survey of Features, Topologies, Controls and Applications Jun Wang, Rolando Burgos, Dushan Boroyevich

• 
  Abstract:
  
  

• D8: FPGA-Based Gain-Scheduled Controller for Control Optimization of Resonant Converters Applied to Domestic Induction Heating Oscar Lucia, Oscar Jimenez, Paolo Mattavelli, Dushan Boroyevich

• 
  Abstract:
  
  

• D9: State of the Art: Survey of FACTS Devices Chi Li, Rolando Burgos, Yaman C. Evrenosoglu

• 
  Abstract:
  
  

Session D3: Modeling and Analysis

• D1: Small-signal Analysis and Design of Constant Frequency V² Peak Control Shuilin Tian, Fred C. Lee, Paolo Mattavelli, Yingyi Yan

• 
  Abstract:
  
  

• D2: I² Average Current Mode Control for Switching Converters Yingyi Yan, Fred C. Lee, Paolo Mattavelli, Pei-Hsin Liu

• 
  Abstract:
  
  

• D3: Small Signal Analysis and Design of Active Droop Control Using Current Mode Equivalent Circuit Model Yingyi Yan, Pei-Hsin Liu, Fred C. Lee, Paolo Mattavelli

• 
  Abstract:
  
  

• D4: Analysis of Phase Locked Loop (PLL) on DQ Impedance Measurement in Three-Phase AC Systems Zhiyu Shen, Marko Jaksic, Bo Zhou, Paolo Mattavelli, Dushan Boroyevich, Jacob Verhust, Mohamed Belkhayat

• 
  Abstract:
  
  

• D5: Design and Implementation of Three-Phase AC Impedance Measurement Unit (IMU) with Series and Shunt Injection Zhiyu Shen, Marko Jaksic, Justin Walraven, Paolo Mattavelli, Dushan Boroyevich, Jacob Verhust, Mohamed Belkhayat

• 
  Abstract:
  
  

• D6: Three-Phase AC System Impedance Measurement Unit (IMU) Using Chirp Signal Injection Zhiyu Shen, Marko Jaksic, Justin Walraven, Paolo Mattavelli, Dushan Boroyevich, Jacob Verhust, Mohamed Belkhayat

• 
  Abstract:
  
  

• D7: Grid-Synchronization Modeling and Its Stability Analysis for Multi-Paralleled Three-Phase Inverter Systems Dong Dong, Bo Wen, Paolo Mattavelli, Yaosuo Xue

• 
  Abstract:
  
  

• D8: Anti-Islanding Protection in Three-Phase Converters Usng Grid Synchronization Small-Signal Stability Dong Dong, Dushan Boroyevich, Paolo Mattavelli, Bo Wen, Yaosuo Xue

• 
  Abstract:
  
  

• D9: A Droop Controller is Intrinsically a Phase-Locked Loop Qing-Chang Zhong, Dushan Boroyevich

• 
  Abstract:
  
  

• D10: Small-Signal Impedance Identification of Three-Phase Diode Rectifier with Multi-Tone Injection Bo Zhou, Marko Jaksic, Paolo Mattavelli, Dushan Boroyevich, Sheau-Wei Fu, Kamiar Karimi

• 
  Abstract:
  
  

• D11: Application of Multi-Tone Approach in Three-Phase AC System Impedance Measurement Bo Zhou, Marko Jaksic, Zhiyu Shen, Bo Wen, Paolo Mattavelli, Dushan Boroyevich, Sheau-Wei Fu, Kamiar Karimi

• 
  Abstract:
  
  

Session D4: EMI and Magnetics

• D1: Modeling of Core Loss under Rectangular AC Voltage and DC Bias Current Mingkai Mu, Fred C. Lee

• 
  Abstract:
  
  

• D2: High Frequency Isolated Bus Converter with Gallium Nitride Transistors and Integrated Transformer David Reusch, Fred C. Lee

• 
  Abstract:
  
  

• D3: Overview of Three-Dimension Integration for Point-of-Load Converters Fred C. Lee, Qiang Li

• 
  Abstract:
  
  

• D4: Improvement in Magnetic Material Characterization Method for Arbitrary Wave Excitation Dongbin Hou, Mingkai Mu, Fred C Lee

• 
  Abstract:
  
  

• D5: EMI Terminal Modelling of DC-Fed Motor Drives II: Differential and Total Noise Hemant Bishnoi, Rolando Burgos, Paolo Mattavelli, Dushan Boroyevich

• 
  Abstract:
  
  

• D6: Total Flux Minimization Control for Integrated Inter-Phase Inductors in Paralleled, Interleaved Three-Phase Two-Level Voltage-Source Converters With Discontinuous Space-Vector Modulation Di Zhang, Fred Wang, Rolando Burgos, Dushan Boroyevich

• 
  Abstract:
  
  

• D7: EMI Filter Design Considering In-Circuit Impedance Mismatching Fang Luo, Dushan Boroyevich, Paolo Mattavelli, Hemant Bishnoi

• 
  Abstract:
  
  

• D8: EMI Filter Design and Optimization for Both AC and DC Side in a DC-fed Motor Drive System Xuning Zhang, Dushan Boroyevich, Paolo Mattavelli, Jing Xue, Fred Wang

• 
  Abstract:
  
  

• D9: Size and Weight Dependence of the Input EMI Filter on Switching Frequency for Low Voltage Bus Aircraft Applications Milisav Danilovic, Fang Luo, Lingxiao Xue, Ruxi Wang, Paolo Mattavelli, Dushan Boroyevich

• 
  Abstract:
  
  

• D10: Improved Common Mode Elimination Modulation for Neutral-Point-Clamped Three-Phase Inverters Xuning Zhang, Dushan Boroyevich, Rolando Burgos, Paolo Mattavelli, Fred Wang

• 
  Abstract:
  
  

• D11: Impact and Compensation of Dead Time on Common Mode Elimination Modulation for Neutral-Point-Clamped Three-Phase Inverters Xuning Zhang, Dushan Boroyevich, Rolando Burgos, Paolo Mattavelli, Fred Wang

• 
  Abstract:
  
  

• D12: Impact of Interleaving on Common Mode EMI Filter Weight Reduction of Paralleled Three-Phase Voltage-Source Converters Xuning Zhang, Dushan Boroyevich, Paolo Mattavelli, Fred Wang

• 
  Abstract:
  
  

• D13: High Frequency Model of a Transformer for Conducted EMI Analysis Kumar Gandharva, Khai D.T. Ngo

• 
  Abstract:
  
  

Session D5: Packaging and Integration

• D1: FEA Modeling of the Low Profile Coupled Inductor with Non-uniform Flux Distribution Yipeng Su, Qiang Li, Fred C. Lee

• 
  Abstract:
  
  

• D2: Survey of High-Temperature Polymeric Encapsulants for Power Electronic Packaging Yiying Yao, Dushan Boroyevich, Khai D. T. Ngo

• 
  Abstract:
  
  

• D3: Improved Procedure to Design Coupled Inductors Based on Geometry Constant Zhemin Zhang, Khai D.T. Ngo

• 
  Abstract:
  
  

• D4: System for Power Cycling and Zth Measurement to Determine the Reliability of IGBT Modules Mudassar Khatib, Khai D.T. Ngo, Guo-Quan Lu

• 
  Abstract:
  
  

• D5: Inductor Geometries with Significantly Reduced Height Han Cui, Khai D.T. Ngo

• 
  Abstract:
  
  

• D6: Integrated Current Sensor Using Giant Magneto Resistive (GMR) for Planar Power Module Woochan Kim, Guo-Quan Lu, Khai D.T. Ngo

• 
  Abstract:
  
  

• D7: Simplification of the Nanosilver Sintering Process for Bonding Large-Area Semiconductor Chips: Reduction of Hot-Pressing Temperature below 200C Kewei Xiao, Jesus N. Calata, Hanguang Zheng, Khai D.T. Ngo, Guo-Quan Lu

• 
  Abstract:
  
  

• D8: Low Temperature Joining Technique of Die-attachment by Silver Sintering Kewei Xiao, Mai T.K. Ngo, Mudassar M. Khatib, Khai D.T. Ngo, Guo-Quan Lu

• 
  Abstract:
  
  

• D9: Fabrication of a Double-side Cooled, High Temperature Power Module with Sintered Nanosilver Interconnect for Automotive Applications David Berry, Li Jiang, Khai D.T. Ngo, Guangyin Lei, Susan Luo, Guo-Quan Lu

• 
  Abstract:
  
  

• D10: Reliability-Oriented Design of Three-Phase Power Converters for Aircraft Applications Rolando Burgos, Gang Chen, Fred Wang, Dushan Boroyevich, Willem Gerhardus Odendaal, Jacobus Daniel Van Wyk

• 
  Abstract: